Five Features
1.Compact structure and small footprint.
2.PC+PLC control system.
3.IR preheating, high thermal efficiency and uniform temperature.
4.Step motor control spraying, more stable and reliable.
5.Adopts small solder pot, reduces the cost.
Built-in Spraying Device
Drawer type module preheating unit
Linkage inlet buffering
Solder Pot with Cast iron Material
1.Conveying system: Direct buffering input structure. Special stainless steel chain transmission, aluminum alloy rail unique design, durable;Conveying system: adopt segmental floating structure, effectively prevent guide rail deformation;
2.Preheating system: Drawer-type energy-saving design.IR preheating,PID mode temperature control ,the temperature accuracy can reach to ±2℃;the dropping temperature between preheating zone and soldering zone is ≤5℃；
3.Flux spraying system:Adopt precision control valve for digital regulation, convenient management. Nozzle movement is controlled by stepping motor.Flux automatic pressure supply, can make the spray flow quickly reach saturation, top exhaustin, filtration system;
4.The solder pot adopts external heating, it is made of cast iron, the inner surface is anticorrosive treatment, with two low-flow nozzle and low oxidation design;
5.Forced air cooling system；
6.PC+PLC control system. Windows7 operation system with Chinese/English operation interface. Processing profile and data auto saving function.Alarm for detecting the flux and solder level.
01 Buffer system
02 Exhaust fan
03 Flux spraying system
04 Pre-heater
05 Solder pot lifting unit
06 Dual wave solder pot
07 Angle adjustment controller
08 Cooling system
09 Finger cleaning system
10 LCD
| Model No. | YSL-300E | YSL-320E |
| Dimension: L*W*H(mm) | 3385*1240*1540 | 3385*1190*1540 |
| Weight | Approx.1150kg | Approx.1100kg |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Start up Power | 28KW | 27KW |
| Normal Running Power | 7KW | 6.7KW |
| Control System | PC+PLC | |
| Spraying movement | Step motor | |
| Spraying Pressure | 0.2Mpa~0.4Mpa | |
| Flux Flow Control | Option | |
| Auto Flux Filling | Standard | |
| Exhausting | Top exhaust | / |
| Exhausting Pipe Diameter(mm) | Φ250 | |
| Exhaust fan power | 370W | / |
| Preheating Mode | IR | |
| Temperature Control Mode | PID | |
| Preheating Zone Quantity | 2 | |
| Preheating Zone Length(mm) | 1500 | |
| Preheating Temperature Range | Room temperature~200℃ | |
| Warm-up Time(min) | Approx.12min(setting: 150℃) | |
| Width(mm) | 50~300 | |
| PCB Conveying Direction | L→R( Option:R→L) | |
| Conveying Speed(mm/min) | 500~1800 | |
| Conveying Height(mm) | 750±20 | |
| Available Component Height(mm) | Top120 Bottom15 | |
| Conveying Speed Control Mode | Closed loop stepless speed regulation by inverter | |
| Finger | Spring Pressing Finger;D-40 Type Finger;Double-hook Finger;Heavy type double hook finger(Options) | |
| Conveying Angle | 4~6° | |
| Solder Pot Type | Mechanical | |
| Solder Pot Material | Casting Iron material | |
| Wave Height Adjustment | Digital Control by PC | |
| Cooling type | Air cooling | / |
| Solder Pot Heating Power | 9KW | 220V 9KW |
| Max Solder Pot Temperature | 300℃ | |
| Solder Pot Capacity | Approx.350kg | |
| Wave Driving Power | 180W*2 3PH 220 VAC | |
| Solder Pot Warm-up Time | Approx.150min(setting: 250℃) | |
| Temperature Control Mode | PID | |
| Finger Cleaning System | Brush | / |
Five Features
1.Compact structure and small footprint.
2.PC+PLC control system.
3.IR preheating, high thermal efficiency and uniform temperature.
4.Step motor control spraying, more stable and reliable.
5.Adopts small solder pot, reduces the cost.
Built-in Spraying Device
Drawer type module preheating unit
Linkage inlet buffering
Solder Pot with Cast iron Material
1.Conveying system: Direct buffering input structure. Special stainless steel chain transmission, aluminum alloy rail unique design, durable;Conveying system: adopt segmental floating structure, effectively prevent guide rail deformation;
2.Preheating system: Drawer-type energy-saving design.IR preheating,PID mode temperature control ,the temperature accuracy can reach to ±2℃;the dropping temperature between preheating zone and soldering zone is ≤5℃；
3.Flux spraying system:Adopt precision control valve for digital regulation, convenient management. Nozzle movement is controlled by stepping motor.Flux automatic pressure supply, can make the spray flow quickly reach saturation, top exhaustin, filtration system;
4.The solder pot adopts external heating, it is made of cast iron, the inner surface is anticorrosive treatment, with two low-flow nozzle and low oxidation design;
5.Forced air cooling system；
6.PC+PLC control system. Windows7 operation system with Chinese/English operation interface. Processing profile and data auto saving function.Alarm for detecting the flux and solder level.
01 Buffer system
02 Exhaust fan
03 Flux spraying system
04 Pre-heater
05 Solder pot lifting unit
06 Dual wave solder pot
07 Angle adjustment controller
08 Cooling system
09 Finger cleaning system
10 LCD
| Model No. | YSL-300E | YSL-320E |
| Dimension: L*W*H(mm) | 3385*1240*1540 | 3385*1190*1540 |
| Weight | Approx.1150kg | Approx.1100kg |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Start up Power | 28KW | 27KW |
| Normal Running Power | 7KW | 6.7KW |
| Control System | PC+PLC | |
| Spraying movement | Step motor | |
| Spraying Pressure | 0.2Mpa~0.4Mpa | |
| Flux Flow Control | Option | |
| Auto Flux Filling | Standard | |
| Exhausting | Top exhaust | / |
| Exhausting Pipe Diameter(mm) | Φ250 | |
| Exhaust fan power | 370W | / |
| Preheating Mode | IR | |
| Temperature Control Mode | PID | |
| Preheating Zone Quantity | 2 | |
| Preheating Zone Length(mm) | 1500 | |
| Preheating Temperature Range | Room temperature~200℃ | |
| Warm-up Time(min) | Approx.12min(setting: 150℃) | |
| Width(mm) | 50~300 | |
| PCB Conveying Direction | L→R( Option:R→L) | |
| Conveying Speed(mm/min) | 500~1800 | |
| Conveying Height(mm) | 750±20 | |
| Available Component Height(mm) | Top120 Bottom15 | |
| Conveying Speed Control Mode | Closed loop stepless speed regulation by inverter | |
| Finger | Spring Pressing Finger;D-40 Type Finger;Double-hook Finger;Heavy type double hook finger(Options) | |
| Conveying Angle | 4~6° | |
| Solder Pot Type | Mechanical | |
| Solder Pot Material | Casting Iron material | |
| Wave Height Adjustment | Digital Control by PC | |
| Cooling type | Air cooling | / |
| Solder Pot Heating Power | 9KW | 220V 9KW |
| Max Solder Pot Temperature | 300℃ | |
| Solder Pot Capacity | Approx.350kg | |
| Wave Driving Power | 180W*2 3PH 220 VAC | |
| Solder Pot Warm-up Time | Approx.150min(setting: 250℃) | |
| Temperature Control Mode | PID | |
| Finger Cleaning System | Brush | / |
