Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Full Automatic solder paste Printer YSL-T5
    Detailed Product Description

    Features

    1.Entirety frame design

    2.Multifunctional platform design

    3.Visual alignment to ensure the accuracy

    4.Integrated transport system

    5.Independent cleaning structure

    6.Squeegee lifting direct connects with screw rod structure

     

    Full Automatic Screen Printer YSL-T5 0

     

    Overall diagram

    1.Rack module

    2.Lifting module

    3.Platform alignment module

    4.Image capture module

    5.Stencil frame positioning module

    6.Squeegee module

    7.Display module

    8.Cleaning module

    9.Conveyor module

    10.Air and power input

    11.Housing module

     

    Full Automatic Screen Printer YSL-T5 1

     

    Technical parameters

     

     

    ParameterYSL-T5
    Basic ParametersScreen Frame Size(mm)650(×)×420(Y)-850(×)×850(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)50(×)×50(Y)mm
    Max PCB(mm)510(X)×510(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height20mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
    ClampSide clamp(Standard),please read the option table
    Edge distancePCB process edge ≥2.5mm
    Conveyor speed0~1500mm/s,increment 1mm
    Conveyor beltU type sync belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Flow directionL-R,R-L,L-L,R-R depends on customer
    Print SystemPrint speed5-200mm/sec adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detectionStandard
    AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
    Positional accuracy±0.01mm
    Printing accuracy±0.025mm
    TimeCycle time<10s(ex print,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 950Kg
    Machine dimensions1530(L)×1680(W)×1540(H)mm
    OptionPneumatic top clampFor PCB(thickness≤1mm)
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin added/
    Auto loading and unloading/
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frameAutomatic positioning of screen frame
    PCB board thickness movement adjustment functionStandard
    Squeegee pressure feedback function/
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring system/
    SPI close loopSPI close loop
    UPS power off protectionUPS 15 min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc


    Product Categories
                                              Full Automatic solder paste Printer YSL-T5
                                              Full Automatic solder paste Printer YSL-T5
                                              Full Automatic solder paste Printer YSL-T5
                                               
                                              Detailed Product Description

                                              Features

                                              1.Entirety frame design

                                              2.Multifunctional platform design

                                              3.Visual alignment to ensure the accuracy

                                              4.Integrated transport system

                                              5.Independent cleaning structure

                                              6.Squeegee lifting direct connects with screw rod structure

                                               

                                              Full Automatic Screen Printer YSL-T5 0

                                               

                                              Overall diagram

                                              1.Rack module

                                              2.Lifting module

                                              3.Platform alignment module

                                              4.Image capture module

                                              5.Stencil frame positioning module

                                              6.Squeegee module

                                              7.Display module

                                              8.Cleaning module

                                              9.Conveyor module

                                              10.Air and power input

                                              11.Housing module

                                               

                                              Full Automatic Screen Printer YSL-T5 1

                                               

                                              Technical parameters

                                               

                                               

                                              ParameterYSL-T5
                                              Basic ParametersScreen Frame Size(mm)650(×)×420(Y)-850(×)×850(Y)
                                              Thickness∶ 20-40mm
                                              Min PCB(mm)50(×)×50(Y)mm
                                              Max PCB(mm)510(X)×510(Y)
                                              Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                                              Curve<1%(Diagonal measurement)
                                              PCB backside Part Height20mm
                                              Conveyor height900±40mm
                                              SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
                                              ClampSide clamp(Standard),please read the option table
                                              Edge distancePCB process edge ≥2.5mm
                                              Conveyor speed0~1500mm/s,increment 1mm
                                              Conveyor beltU type sync belt
                                              Stopper methodAir cylinder
                                              Stopper positionSet the PCB stopper position according to the size of board
                                              Flow directionL-R,R-L,L-L,R-R depends on customer
                                              Print SystemPrint speed5-200mm/sec adjustable
                                              Print headStep motor drive scraper lifting
                                              ScraperSteel scraper,rubber scraper(option)
                                              Scraper angle60°
                                              Scraper pressure0~20kg
                                              View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                                              Alignment position methodMark Automatic aligning
                                              CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                                              Acquire image methodUpper/under double photo
                                              Camera lightCoaxial light,Ring light four kinds light can adjustable
                                              View range9mm*7mm
                                              Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                                              Mark shapeCir,Rec,or rhombus etc
                                              Mark positionPCB dedicated mark or PCB pad
                                              2D detectionStandard
                                              AccuracyTable adjusting rangeX=±3mm,Y=±7mm,0=±1.5°
                                              Positional accuracy±0.01mm
                                              Printing accuracy±0.025mm
                                              TimeCycle time<10s(ex print,cleaning time)
                                              Convert line time<5min
                                              Programming time<10min
                                              Control SystemComputer configurationIndustrial PC,Windows official system
                                              System languageChinese /English
                                              Pre and next machine connectionSMEMA
                                              User authorizationUser PW and Senior PW set
                                              Cleaning SystemCleaning systemDry and Wet(standard),vacuum model(optional)
                                              Liquid level detectionLiquid level auto alarm detection
                                              Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                                              Total powerAbout 3kw
                                              Main air supply4.5~6kgf/cm2
                                              Machine weightAbout 950Kg
                                              Machine dimensions1530(L)×1680(W)×1540(H)mm
                                              OptionPneumatic top clampFor PCB(thickness≤1mm)
                                              Top clamp + side clampFor PCB(thickness≤1mm)
                                              Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                                              Auto tin added/
                                              Auto loading and unloading/
                                              Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                                              Automatic positioning of screen frameAutomatic positioning of screen frame
                                              PCB board thickness movement adjustment functionStandard
                                              Squeegee pressure feedback function/
                                              Air conditionCustomer can buy by themselves
                                              The rest of solder paste on the stencil monitoring system/
                                              SPI close loopSPI close loop
                                              UPS power off protectionUPS 15 min power off protection
                                              Industry 4.0Bar code trace function,Production analysis,etc


                                              Online Message
                                              Welcome message, we will reply within 24 hours!
                                              *Subject:
                                              *Your E-Mail:
                                              (Please make sure your E-mail address is correct.
                                              Else, the receiver cannot reply you afterwards. )

                                              Content:
                                              *Country/Region:
                                              Your Company:
                                              Your Name:
                                              Tel:
                                              Fax:
                                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                              CONTACT US
                                              Contacts:Eva Liu +86 13416743702
                                              Tel:+86-512-62751429
                                              Skype:evaliuhuan
                                              Email:sales@yushunli.com evaliu@hk-yush.com
                                              Company Address:Address: Building H, GuoRui Pioneering
                                              Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                                              Suzhou,Jiangsu,China.
                                              Postcode:215331
                                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016