Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Full Automatic Screen Printer YSL-120
    Detailed Product Description

    Features

    1.Perfect solution for large size product printing

    2.Simple calibration and maintenance

    3.Stable printing quality

    4.Independent developed image processing software

     

    Full Automatic Screen Printer YSL-120 0

     

    Overall diagram

    1.Machine housing module

    2.CCD image capture module

    3.Stencil lifting module of Z-axis

    4.Squeegee printing module

    5.Cleaning module

    6.Platform fine adjustment module

    7.Rail and conveyor module

    8.Three color warning lamp

    9.Display and input device

     

    Full Automatic Screen Printer YSL-120 1

     

    Technical parameters

     

    ParameterYSL-120
    Basic ParametersScreen Frame Size(mm)1000(×)×300(Y)-1500(×)×650(Y)
    Thickness∶ 20-40mm
    Min PCB(mm)80(×)×50(Y)mm
    Max PCB(mm)1200(X)×360(Y)
    Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
    Curve<1%(Diagonal measurement)
    PCB backside Part Height15mm
    Conveyor height900±40mm
    SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
    ClampSide clamp(Standard),please read the option table
    Edge distancePCB process edge ≥2.5mm without PCB edge(Option)
    Conveyor speed0~1500mm/sec,increment 1mm
    Conveyor beltU type belt
    Stopper methodAir cylinder
    Stopper positionSet the PCB stopper position according to the size of board
    Set by softwareSoftware Settings
    Print SystemPrint speed5-200mm/s adjustable
    Print headStep motor drive scraper lifting
    ScraperSteel scraper,rubber scraper(option)
    Scraper angle60°
    Scraper pressure0~20kg
    View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
    Alignment position methodMark Automatic aligning
    CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
    Acquire image methodUpper/under double photo
    Camera lightCoaxial light,Ring light four kinds light can adjustable
    View range9mm*7mm
    Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
    Mark shapeCir,Rec,or rhombus etc
    Mark positionPCB dedicated mark or PCB pad
    2D detectionStandard
    AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±1.5°
    Positional accuracy±0.01mm
    Printing accuracy±0.025mm
    TimeCycle time<10s(ex print,cleaning time)
    Convert line time<5min
    Programming time<10min
    Control SystemComputer configurationIndustrial PC,Windows official system
    System languageChinese /English
    Pre and next machine connectionSMEMA
    User authorizationUser PW and Senior PW set
    Cleaning SystemCleaning systemDry and Wet,vacuum model
    Liquid level detectionLiquid level auto alarm detection
    Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
    Total powerAbout 3kw
    Main air supply4.5~6kgf/cm2
    Machine weightAbout 1500Kg
    Machine dimensions2350(L)×1350(W)×1590(H)mm
    OptionPneumatic top clampStandard
    Top clamp + side clampFor PCB(thickness≤1mm)
    Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
    Auto tin added/
    Auto loading and unloading/
    Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
    Automatic positioning of screen frame/
    PCB board thickness movement adjustment functionStandard
    Squeegee pressure feedback function/
    Air conditionCustomer can buy by themselves
    The rest of solder paste on the stencil monitoring systemT/
    SPI close loopSPI close loop
    UPS power off protectionUPS 15 min power off protection
    Industry 4.0Bar code trace function,Production analysis,etc


    Product Categories
                                              Full Automatic Screen Printer YSL-120
                                              Full Automatic Screen Printer YSL-120
                                              Full Automatic Screen Printer YSL-120
                                               
                                              Detailed Product Description

                                              Features

                                              1.Perfect solution for large size product printing

                                              2.Simple calibration and maintenance

                                              3.Stable printing quality

                                              4.Independent developed image processing software

                                               

                                              Full Automatic Screen Printer YSL-120 0

                                               

                                              Overall diagram

                                              1.Machine housing module

                                              2.CCD image capture module

                                              3.Stencil lifting module of Z-axis

                                              4.Squeegee printing module

                                              5.Cleaning module

                                              6.Platform fine adjustment module

                                              7.Rail and conveyor module

                                              8.Three color warning lamp

                                              9.Display and input device

                                               

                                              Full Automatic Screen Printer YSL-120 1

                                               

                                              Technical parameters

                                               

                                              ParameterYSL-120
                                              Basic ParametersScreen Frame Size(mm)1000(×)×300(Y)-1500(×)×650(Y)
                                              Thickness∶ 20-40mm
                                              Min PCB(mm)80(×)×50(Y)mm
                                              Max PCB(mm)1200(X)×360(Y)
                                              Thickness0.2mm~6mm( Use jig when pcb less than 0.4mm)
                                              Curve<1%(Diagonal measurement)
                                              PCB backside Part Height15mm
                                              Conveyor height900±40mm
                                              SupportMagnetic support,Magnetic piece,Vacuum chamber(Option)
                                              ClampSide clamp(Standard),please read the option table
                                              Edge distancePCB process edge ≥2.5mm without PCB edge(Option)
                                              Conveyor speed0~1500mm/sec,increment 1mm
                                              Conveyor beltU type belt
                                              Stopper methodAir cylinder
                                              Stopper positionSet the PCB stopper position according to the size of board
                                              Set by softwareSoftware Settings
                                              Print SystemPrint speed5-200mm/s adjustable
                                              Print headStep motor drive scraper lifting
                                              ScraperSteel scraper,rubber scraper(option)
                                              Scraper angle60°
                                              Scraper pressure0~20kg
                                              View SystemSubstrate SeparationThree-section Substrate Separation;Speed∶0.1-20mm/s;Distance∶0-20mm
                                              Alignment position methodMark Automatic aligning
                                              CameraGermany BASLER,1/3”CCD,640*480pixel,pixel size 5.6μmx5.6μm
                                              Acquire image methodUpper/under double photo
                                              Camera lightCoaxial light,Ring light four kinds light can adjustable
                                              View range9mm*7mm
                                              Mark dimensionsDiameter or Side length 1mm~2mm,allowable offset 10%
                                              Mark shapeCir,Rec,or rhombus etc
                                              Mark positionPCB dedicated mark or PCB pad
                                              2D detectionStandard
                                              AccuracyTable adjusting rangeX=±10mm,Y=±10mm,0=±1.5°
                                              Positional accuracy±0.01mm
                                              Printing accuracy±0.025mm
                                              TimeCycle time<10s(ex print,cleaning time)
                                              Convert line time<5min
                                              Programming time<10min
                                              Control SystemComputer configurationIndustrial PC,Windows official system
                                              System languageChinese /English
                                              Pre and next machine connectionSMEMA
                                              User authorizationUser PW and Senior PW set
                                              Cleaning SystemCleaning systemDry and Wet,vacuum model
                                              Liquid level detectionLiquid level auto alarm detection
                                              Power ParametersMain power supplyAC220V±10%50/60HZ Single phase
                                              Total powerAbout 3kw
                                              Main air supply4.5~6kgf/cm2
                                              Machine weightAbout 1500Kg
                                              Machine dimensions2350(L)×1350(W)×1590(H)mm
                                              OptionPneumatic top clampStandard
                                              Top clamp + side clampFor PCB(thickness≤1mm)
                                              Vacuum adsorption and cleanFor PCB(thickness≤1mm)and FPC
                                              Auto tin added/
                                              Auto loading and unloading/
                                              Flexible and universal supportFor the Double-sided PCB(PCB backside parts Height ≤9mm)
                                              Automatic positioning of screen frame/
                                              PCB board thickness movement adjustment functionStandard
                                              Squeegee pressure feedback function/
                                              Air conditionCustomer can buy by themselves
                                              The rest of solder paste on the stencil monitoring systemT/
                                              SPI close loopSPI close loop
                                              UPS power off protectionUPS 15 min power off protection
                                              Industry 4.0Bar code trace function,Production analysis,etc


                                              Online Message
                                              Welcome message, we will reply within 24 hours!
                                              *Subject:
                                              *Your E-Mail:
                                              (Please make sure your E-mail address is correct.
                                              Else, the receiver cannot reply you afterwards. )

                                              Content:
                                              *Country/Region:
                                              Your Company:
                                              Your Name:
                                              Tel:
                                              Fax:
                                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                              CONTACT US
                                              Contacts:Eva Liu +86 13416743702
                                              Tel:+86-512-62751429
                                              Skype:evaliuhuan
                                              Email:sales@yushunli.com evaliu@hk-yush.com
                                              Company Address:Address: Building H, GuoRui Pioneering
                                              Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                                              Suzhou,Jiangsu,China.
                                              Postcode:215331
                                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016