Second, product overview

1, flexible and diverse welding methods, with spot welding, drag welding (pull welding) and other functions.

2, the machine arm is aligned with the aluminum profile casting, no deformation, no damage, stable operation.

3, the device write work program can be point-to-point, block-to-block copy, change the programming time.

4, the device has an automatic cleaning function, must maintain a stable solder processing quality and extend the soldering iron nozzle.

5, multi-axis linkage manipulators, all using precision stepper motor drive and advanced motion control algorithms to effectively improve motion positioning accuracy and repeatability.

6, the equipment welding module has an automatic buffer function to avoid damage to the welding product during equipment commissioning and operation.

7. The device has a position calibration function. If there is an overall deviation, make a mark on the soldering platform. [Optional] Read the deviation data and perform a quick calibration.

8, the temperature controller can be adjusted to a temperature range of 5-500 ° C, accurate to ± 5 seconds, constant temperature control, fast temperature compensation.

9, the tin machine has a broken tin function, which can effectively prevent the situation of tin slag splash during the production process, greatly improving the quality and appearance of the product.

Precautions

1 Luo iron head should choose the appropriate temperature                         2 If not used should turn off the power                   3 Tip should be replaced in time

Method / step

When using the tip for the first time, be sure to adjust the temperature of the soldering iron to 220 degrees, and let the tin on the soldering iron tip fully eat tin. It is best to soak it in the tin for 5 minutes, then wipe it on the cleaning sponge. The temperature of the soldering iron is adjusted to 300 degrees, the above procedure is repeated, and finally the temperature of the soldering iron is adjusted to the required operating temperature for use. The purpose is to form a comprehensive protective film on the tin layer of the soldering iron tip to prevent it from being oxidized at high temperatures, resulting in failure of heat transfer.



Regularly clean the tip. If the tin-plated part of the automatic soldering iron tip contains black oxide, apply a new tin layer and wipe the tip with a moist cleaning sponge. Repeat the cleaning in this way until the oxide is completely removed, and then apply a new tin layer. Regularly clean the tip.

After use, remember to turn off the power and wipe the soldering iron on the cleaning sponge, then apply a new layer of tin. Before using it again, wipe the soldering iron on the cleaning sponge and then apply a new layer of tin.

Product Details
First, the product automatic soldering machine introduction

1, using 480 X 272 pixels, 16 million color true color 5 inch LCD display handheld programmer, strong visibility, so that the operation menu interface and boot screen content is more abundant.

2, and U disk program copy function, online / offline programming

3, gantry desktop architecture, stable and reliable

4, specialized tin control software to ensure good soldering effect

5, China's first 400W high-power high-frequency heating core, more rapid temperature recovery, welding quality is more stable

6, professional stepper motor driven tin feeder to make the precision of sending tin higher

7, the memory capacity is large, and the digital display, can store 999 sets of different welding procedures, and the programs between different machines can copy each other.

8. The solder parameter setting is set by programming point, which can realize different solder parameter setting in different areas during the same solder processing.