Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
News
Fpc flexible circuit board punching machine

Circuit board board machine

The machine adopts a unique multi-continuous cutting method. The cutting of the board is completed by six blades, and the upper and lower pieces are a group to form a cutting unit. They are A, B, C, and three groups. The whole cutting process is divided into three stages. The A-group blade cuts the board 40% first, then the B-blade again runs through the slot cut by the A-blade, and again completes 40% of the cutting amount, and finally the C-group blade cuts the last. 20% and repairing light, because the amount of cutting is small each time, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth and smooth, and the board surface is very flat and not twisted. Not tilting. It is the only machine on the market that can guarantee the deformation of the aluminum plate after cutting.


Common classification

Pneumatic splitter. Walking plate splitter: Features:
1, simple operation, fast speed
2. Minimize the internal stress generated when cutting the board to avoid tin cracking
3. Any PCB board with V-Cut can be applied to this machine.
4, the upper and lower round knife can be adjusted accurately
5, round knife can be used repeatedly for grinding, the shape of the cutter can be customized
Knife-type separator: Features:
1. The PCB does not move during the cutting process, and the round knife slips to ensure that the electronic components of the substrate are not damaged by the movement.
2, the four selectable plate speeds are set by the control panel knob, the board stroke can be freely set and has LCD display
3. In view of the depth of the V-groove and the tool consumption, the distance between the upper and lower straight knives can be accurately adjusted. 4. The parts can be solved across the V-groove to realize the sub-board.
5. Minimize the internal stress generated when cutting the board to avoid tin cracking
6, three sets of safety photoelectric eye and round knife safety protection staff



Fpc flexible circuit board punching machine

1. High degree of automation, simple and safe operation

2, can replace a variety of molds, and easy to change the mold

3, the lower mold automatically enters and exits, pick and place products are convenient, the finished product can fall into the drawer

4. Minimize internal stress generated during cutting and avoid tin cracking

5, punching semi-finished PCB, FPC is extremely efficient

6. The number of punching plates can be set through the touch screen, and the number of times the device is divided can be exported.

7, with safety grating and safety door double protection, the operator is safer to operate.

8, the company has hydraulic press, pressurized pneumatic punch, mechanical pneumatic punching three FPC and PCB die cutting machine, according to different customer products need to choose different styles of punch, welcome new and old customers to visit the factory to buy.

Product Categories
                                        Location: Home -> News

                                        Fpc flexible circuit board punching machine


                                        Circuit board board machine

                                        The machine adopts a unique multi-continuous cutting method. The cutting of the board is completed by six blades, and the upper and lower pieces are a group to form a cutting unit. They are A, B, C, and three groups. The whole cutting process is divided into three stages. The A-group blade cuts the board 40% first, then the B-blade again runs through the slot cut by the A-blade, and again completes 40% of the cutting amount, and finally the C-group blade cuts the last. 20% and repairing light, because the amount of cutting is small each time, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth and smooth, and the board surface is very flat and not twisted. Not tilting. It is the only machine on the market that can guarantee the deformation of the aluminum plate after cutting.


                                        Common classification

                                        Pneumatic splitter. Walking plate splitter: Features:
                                        1, simple operation, fast speed
                                        2. Minimize the internal stress generated when cutting the board to avoid tin cracking
                                        3. Any PCB board with V-Cut can be applied to this machine.
                                        4, the upper and lower round knife can be adjusted accurately
                                        5, round knife can be used repeatedly for grinding, the shape of the cutter can be customized
                                        Knife-type separator: Features:
                                        1. The PCB does not move during the cutting process, and the round knife slips to ensure that the electronic components of the substrate are not damaged by the movement.
                                        2, the four selectable plate speeds are set by the control panel knob, the board stroke can be freely set and has LCD display
                                        3. In view of the depth of the V-groove and the tool consumption, the distance between the upper and lower straight knives can be accurately adjusted. 4. The parts can be solved across the V-groove to realize the sub-board.
                                        5. Minimize the internal stress generated when cutting the board to avoid tin cracking
                                        6, three sets of safety photoelectric eye and round knife safety protection staff



                                        Fpc flexible circuit board punching machine

                                        1. High degree of automation, simple and safe operation

                                        2, can replace a variety of molds, and easy to change the mold

                                        3, the lower mold automatically enters and exits, pick and place products are convenient, the finished product can fall into the drawer

                                        4. Minimize internal stress generated during cutting and avoid tin cracking

                                        5, punching semi-finished PCB, FPC is extremely efficient

                                        6. The number of punching plates can be set through the touch screen, and the number of times the device is divided can be exported.

                                        7, with safety grating and safety door double protection, the operator is safer to operate.

                                        8, the company has hydraulic press, pressurized pneumatic punch, mechanical pneumatic punching three FPC and PCB die cutting machine, according to different customer products need to choose different styles of punch, welcome new and old customers to visit the factory to buy.

                                        YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                        CONTACT US
                                        Contacts:Eva Liu +86 13416743702
                                        Tel:+86-512-62751429
                                        Skype:evaliuhuan
                                        Email:sales@yushunli.com evaliu@hk-yush.com
                                        Company Address:Address: Building H, GuoRui Pioneering
                                        Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                                        Suzhou,Jiangsu,China.
                                        Postcode:215331
                                        YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016